E36 Rear Sway Bar Reinforcement: Installation, and Orientation

Below are some installation photos of the E36 Rear Sway bar Reinforcements fully Installed on an e36 328i rear subframe. The provided brackets must be installed on the rear section of the subframe near the rear subframe bushings. No cutting is required however the plates must be installed by a qualified welder or fabricator. If you don't feel confident welding these brackets in or can't find someone to do them. We do offer an exchange service on complete subframes that come with these brackets welded on as well as a few others.

We hoped this helps with your installation, however, if you have any further questions feel free to email [e-mail]!