Why does my motor touch the brake booster in 24v motor swap using the 24v mounts?
Intake touches brake booster when using 24v e30 DOHC swap poly motor mounts in M50, M52, S52, and all other DOHC motor swaps.
Not using correct brake booster. Our poly motor mounts will get your motor in the correct angle and placment. But no motor mount will get your intake to not touch your brake booster.
When doing a DOHC swap, you must use a smaller brake booster (like the commonly used E21 brake booster in an e30) as well as sand down the fins of the intake. This is common practice and found in almost every DOHC E30 swap guide found online.